All photos are customer submitted and the products listed below are based on our best judgement for recreating this particulat look. All products used in this project may not be listed including some Accessories, Abrasives, and Trowels & Finishing Tools . Each project is different and some may require additional tools and accessories. For more information on the products you may need for your project, please visit our Product Guide
About Image: This is the color of a standard concrete mix with the Liqui-Crete, no additional color was added. Here you see a good example of a flush mount apron front sink. The best way to form this is similar to how we form the opening to a slide in range. You can see this in our “Full Instructional Video” around the 4 minute mark. The difference here is that you need to also form out a section of concrete for behind the sink. You want to make sure when you mount the sink that the top of it sits 2-1/8” higher than the top of the cabinet in order for it to sit flush with the top of the countertop. This photo is also a really good example of the look and gloss achieved with the Aqua-Poxy sealer.
Faucet Knockout | Concrete Countertop Solutions
One reusable silicone faucet knockout that will create a 1-1/4" hole which will work with most standard faucets. It will also create a 2-1/2" pocket that is 1" beneath the surface to fasten hardware in. This will accept most fa