|  All photos are customer submitted and the products listed below are based on our best judgement for recreating this particulat look. All products used in this project may not be listed including some Accessories, Abrasives, and Trowels & Finishing Tools . Each project is different and some may require additional tools and accessories. For more information on the products you may need for your project, please visit our Product Guide About Image: The bendable square edge was used to make the slightly radius sides of this conference table. This table was poured with our White Countertop Mix but a similar look can be achieved with standard gray concrete and Liqui-Crete additive. For staining, the concrete was misted with water and then the black stain was misted with a spray bottle onto the damp concrete in a random pattern. Finally, it was sealed with several coats of SiAcryl 14.
|  Bendable Square Form | Concrete Countertop Solutions A standard 8' long square edge form (single piece of SE-001 or SE-002) that is factory cut to accommodate a radius as tight as 6". Use electrical tape in the bottom of forms to seal up holes after the form has been attached. Id |
| |