White Bathroom Vanity Concrete Countertop -82


All photos are customer submitted and the products listed below are based on our best judgement for recreating this particulat look. All products used in this project may not be listed including some Accessories, Abrasives, and Trowels & Finishing Tools . Each project is different and some may require additional tools and accessories. For more information on the products you may need for your project, please visit our Product Guide

About Image: This vanity was poured with our White Countertop Mix. The White Counter-Patch was used to fill in voids around the sink but the ones in the edges were left alone. To make a cutout for a vanity sink with non-vertical walls, you can use dense foam board to plug up the sink. Wrap the foam board in packing tape to get a smooth edge. You can use Diamond-Discs to get a light exposure like you see here and prep before sealing. Finally this was sealed with Aqua-Poxy for a thicker semi-gloss finish.


FG50 Fiber Mesh Reinforcement
FG50 Fiber Mesh Reinforcement

FG50 Alkali Resistent

From: $49.99 View Product
Z Counter-Patch
Z Counter-Patch

Z Counter-Patch is a specially formulated cement patch mix. Fine and fortified, Z Counter-Patch is the quickest and easiest way to fill the voids that occasionally appear in your countertop edges. It dries

From: $20.00 View Product
Z Aqua-Poxy (2 qt. epoxy sealer)
Z Aqua-Poxy (2 qt. epoxy sealer)

Water Based Epoxy Sealer Z Aqua-Poxy is a 2 part water based epoxy for concrete

From: $79.00 View Product
Z Clips
Z Clips

Z Clips are used to hold FG50 alkali

From: $19.99 View Product
Square Edge
Square Edge

Full Package includes eight- 8' pieces (64 lineal feet) and six - 8' backwall pieces (48 lineal feet). Half Package includes four - 8' pieces (32 li

From: $139.00 View Product
White Countertop Mix
White Countertop Mix

**If purchasing more than 18 bags of White Counterop Mix or shipping to a commercial address, please call us at 570-587-3799 for accurate freight pricing. Residential orders und

From: $29.00 View Product
Diamond-Disc
Diamond-Disc

Diamond sanding pads that will attach to just about any 5" - 8 hole palm sander. Lasts longer and cuts better than any other "sand paper" on the market. These are electro-plated diamond pads (not diamonds in resin) so they do not require the high

From: $29.00 View Product
TEASoftware