These Precast Bar Corbels are the integral piece to the full custom look of the raised bar addition. The corbel is notched along the edge to rest on the top of the precast wall panels. This corbel will create a 5" rise from the top of the precast wall panel. They are notched to then sit on top of the countertop and create a 3-1/8" rise from there. This will create a straight 8-1/2" overhang for bar seating with roughly a 24" deep countertop. These corbels will occupy about 14" of countertop space so plan appliance placement accordingly.
They should be spaced roughly every 20" - 25" on center. The filler stones that go between the corbels are 25" (so this is the max spacing) but they can be cut smaller if the corbels are closer together. You will also need the End Pieces which can be purchased in a Right and Left orientation.
They can be left plain gray or stained to match the color scheme of your panel design. When complete, they essentially look like part of the panel wall.